Image print size checker for book interiors

The sum: KDP asks for at least 300 DPI, so a picture needs 300 pixels for every inch it prints. A full 6 x 9 inch page needs 1,800 x 2,700 pixels, and a 4 x 6 inch picture needs 1,200 x 1,800. Drop one picture or forty. Pick your trim size and how the picture is used. For each file you see its pixel size, the largest it can print at 300 pixels per inch, the pixels per inch it gets in your book, and whether it passes or by how many pixels it falls short. The pictures are read in your browser and never uploaded.

Or drop them here. They stay on your device.
How the picture is used

Pick your pictures to see the results.

The link keeps your trim size and use after the # sign, which a browser never sends to a server. It does not keep your pictures. Print this page to get the table as a record.

Why the DPI stored in the file does not matter

A picture file can carry a DPI label, and a program can change it without touching a single pixel. What a printer gets is the pixel count spread over the printed size. KDP says to check it this way: "If you don't know if your images are high resolution, check the image details and calculate the DPI: Divide the number of pixels by the image size." Its example: "the pixel count of your image is 1200 x 1800, and the image is 4" x 6". That means your image has 300 DPI." This page does that sum, so a file labelled 72 with enough pixels passes, and a file labelled 300 with too few does not.

What each print service says

  • KDP, paperback: interior images need a "Minimum resolution of 300 DPI." and "We recommend a maximum resolution of 600 DPI, to keep your total file size under 650MB." Paperback submission guidelines, checked 17-Nov-26. Its formatting page adds: "After you insert your images, don't enlarge them because this will decrease the resolution." Fix paperback and hardcover formatting issues, checked 17-Nov-26. Neither page says the Previewer flags low-resolution pictures, so do not rely on it to catch them.
  • KDP, bleed: "If you want your images to bleed to the edges of your pages, extend them 0.125" (3.2 mm) beyond the final trim size from the top, bottom, and outer edges", and the PDF is "0.25" (6.4 mm) higher and 0.125" (3.2 mm) wider than your selected trim size". This page adds that to the picture's size when you tick bleed.
  • IngramSpark: "The resolution for all images is recommended to be 300ppi." and "Images with a lower resolution may not print as intended, appear blurry, or be pixelated." File requirements for print books, checked 17-Nov-26.
  • Lulu: "We have tested print quality at various resolutions and found that 300 PPI is the optimum resolution." and "We suggest keeping images under 600 PPI; any improvement in print quality is negligible and only results in a huge file size." Image formatting: the basics, checked 17-Nov-26.

Blurb is not here because its resolution page would not open for me on 17-Nov-26, and I do not copy a figure from anywhere else. What the colour column says comes from the file header, and only for JPEG and PNG. A spread is the width of two pages (plus bleed on the outer edges if ticked). A photo rotated by the camera is read the way it will show.

Next steps: the picture book layout planner tells you the picture size a page needs, the KDP PDF checker looks at the finished PDF, and my book formatting service is there if you want it done for you.

To place a picture at the size a page needs, the Picture Book Template Pack has picture boxes with the pixel size written inside.

More free tools: the ACX audio checker, the EPUB checker, the Kindle delivery cost checker, the KDP manuscript checker, the KDP PDF checker and the self-publishing cost calculator. See all the free tools.

Pictures sorted. Now the rest.

I've published 230 books, and the free checklist is the 12 steps I follow for every one, from choosing a topic to setting up the book's marketing.

You get the free checklist and Chris's emails. Unsubscribe any time. Privacy policy